You are here:
Definition

E1 is the formaldehyde emission class that most of Europe, and much of the world outside North America, treats as the legal minimum for interior board. Under EN 717-1 chamber testing the limit is 0.124 mg/m³, roughly 0.1 ppm — a different test and a different unit from the Chinese E1 figure of 1.5 mg/L.

One label, two measurements

In Europe, E1 is measured in a chamber and expressed in mg/m³ or ppm. In China, E1 is measured by the desiccator method and expressed in mg/L. Both are called E1, and the numbers are not comparable — 1.5 mg/L is not "fifteen times" 0.124 mg/m³, because the methods measure different things.

This matters commercially. A supplier quoting "E1" without the method is quoting a label, and the label means different things in different markets. Ask which standard: EN 717-1, GB/T, or ASTM.

What E1 refers to in different markets
MarketMethodE1 limitNotes
EuropeEN 717-1 chamber0.124 mg/m³Legal baseline for interior board
ChinaDesiccator1.5 mg/LE0 (0.5 mg/L) sits below it
Australia / NZAS/NZS referencesVaries by applicationProject specs often cite E1 or better
United StatesCARB / TSCA0.09–0.13 ppmDifferent class system, not called E1

Why E1 is a floor, not a feature

Every board legally sold for interior use in the EU meets E1. Presenting it as an achievement is like advertising that a car has brakes. What differentiates suppliers is the grade above E1 — E0, CARB P2 where relevant, or a specific low-emission board with a named test report.

That said, E1 compliance is worth verifying rather than assuming. Board sold into export markets does not always carry the certificate the destination requires, and the gap is discovered at customs or at handover.

How to verify it properly

Request the test report for the specific board grade, with the method stated, the factory named and the date within the last two years. A certificate covering "particleboard" generally is not evidence for the 18 mm E1 board in your container.

On large projects, ask for a batch-level declaration and keep a sample of each board type. If a question arises later, the retained sample is the only thing that settles it.

Frequently asked questions

Is E1 safe?

E1 is the legal minimum for interior board in the EU and is considered acceptable for normal residential use. Lower-emission boards exist for sensitive applications; E1 is the floor, not the ceiling.

Is Chinese E1 the same as European E1?

No. Same label, different method and unit — 1.5 mg/L by desiccator versus 0.124 mg/m³ by chamber. They cannot be converted directly.

Does E1 board need to be declared on the invoice?

For most export markets, yes — the commercial documents should reference the standard and the grade. It also protects you if the board is questioned on arrival.

What is better than E1?

E0 (0.5 mg/L, desiccator) in Asian specifications, or a board with a verified chamber result below the EN 717-1 limit. In the US, CARB P2 / TSCA Title VI applies instead.

BFP
BFP Project Team
Cabinetry manufacturing & export · since 2016

This guide is based on live project files: specification reviews, pre-shipment inspection reports and clearance documents from apartment, townhouse and villa work. Where a figure varies by project we give the range rather than a single number. Standards and duty treatment should be confirmed against the current version and your own customs broker.

  Send floor plans and unit count — drawings and per-unit price back within 24 hours.
Related project cases
All projects →


×

Contact Us

Full Name *
Business Email *
WhatsApp / Phone (Fast Response)
Project Type (Optional)
Estimated Units / Quantity (Optional)
Project Details / Message *

This website utilizes cookies.

We employ cookies to analyze website traffic and enhance your browsing experience. Data securely aggregated, privacy protected. See Privacy Policy for details.

I agree