Various Production Materials Used for Bathroom Vanity Cabinets

Views: 827 Author: Site Editor Publish Time: Origin: Site

Selecting, a polished bathroom vanity cabinet can be a disturbing task, but when you are to pick from different materials, it can get more complicated.

Whether you are remodeling your decor or simply replacing your bathroom, you need to assess what is good or best for you, your wallet, and your household.

So, instead of choosing the first attractive, cheap vanity cabinet you see, it would be better to do a little research (or glance at this article). Most vanity cabinets will probably be made of Plywood or Solid wood, Particle Board, or Medium Density Fiberboard (MDF). So, let’s identify these various materials.

vanity cabinet 1.jpg

Solid Wood:

Since nothing relates to solid wood in most projects, it may not ALWAYS be the fairest option for a bathroom vanity cabinet. Solid wood has two alternatives; solid hardwood and solid wood (all natural real wood).

Solid hardwood is the most reliable wood material which is made from wood like cherry, oak, and maple. When there is a change in humidity it can get widen. Expansion can inflict damage on the painted finish and also warping (in radical cases).

Real wood has an absorbent nature, which makes it absorb water molecules in the atmosphere. Nevertheless, I didn’t say that real wood is bad material. It is still the best choice by many builders and contractors and it has been in existence for years.

The stability and vitality of solid wood is the reason why various people choose it for vanity cabinets, so it all depends on your choice. Once humidity is in check, most homeowners won’t have any issues with this fascinating material. It works best with a colored or natural texture.


Plywood is artificially from surfaces of wood glued into layers that form sheets. This material appears in a variety of qualities and thicknesses. At a reasonable price, this material consists of quick-dry glasses, softwoods and holes repeatedly found between the layers.

This plywood is sometimes covered with a plastic that has a wood grain pattern, because the wood they use may not finish and be attractive. But at a valuable price, it is an attractive wood and a very solid choice for your bathroom vanity cabinet. It will barely lose quality.

To avoid selecting the wrong wood which will be damaged by water, valuable plywood is the finest and has Accomplished a high rate in terms of holding up for a long time.

Few people question a vanity cabinet that has plywood on the back and sides and marvel if solid wood would be a good choice. It’s not. In a long run, plywood will be stronger than solid wood. Why?

This is because the plywood will not get broadened to changes such as temperatures/humidity/moisture compared to solid wood. So, for your bathroom vanity cabinet material, plywood is the finest choice.

Particle Board:

This is an inter-mix sheet material made by mixing wood fractions with glue and then pressed into sheets by heat. It is can be enclosed with wood gloss, laminate, or melamine.

Particle board materials are evaluated based on their overall density and particle size. It is reasonable to produce and buy; however, it can fade under a load of a solid surface countertop, such as quartz or granite. Another disadvantage of particle board is that it gets damaged easily by steam or water.

At the initial stage, you may not notice how much steam comes in touch with your vanity cabinet. Each time you bathe or have hot water flowing for more than a few seconds your vanity cabinet is subject to steam.

This will make the material depreciate in quality and a need for replacement would be early. Finally, particle board is not advisable for bathroom vanity cabinets.

vanity cabinet 2.jpg

Medium Density Fiberboard (MDF):

MDF otherwise called Medium Density Fiberboard is an engineered material made from mixed wood particles and fibers which are held together with either a polish or wax adhesive. It is much denser and similar to particle board.

Reasonable price and smooth surface are benefits of MDF. You won’t find chips or knots around its rims that is, enough paint is applied on its surface. Nevertheless, there are disadvantages to using MDF. If left undone and it gets wet it will rise and value will be lost.

Painting the medium-density board will seal it, hence avoiding any off-gassing. So if you are looking for a painted vanity cabinet, MDF could be the direction to follow.

Partner with us for Exquisite bathroom vanity cabinets

In need of high-quality vanity cabinets? If yes, you can place your order to get the best and most carefully modeled bathroom vanity cabinets with exceptional quality to suit your comfort.

Kindly click here for more information or to see our range of products and services

Customize the"only" cabinet for your dream home

You dream It, we design It.

Schedule A Chat

Contact Us


By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree