how to measure kitchen cabinet doors

Lacquer Kitchen Cabinet With Finger Pull Door Style

Add To Basket Inquire

White PVC Kitchen With Grey Quartz Countertop

Add To Basket Inquire

2021 Modern High Gloss Lacquer Kitchen Cabinets

Add To Basket Inquire

High End High Gloss Lacquer Kitchen Cabinets

Add To Basket Inquire

Manufacture Wholesale Chinese Sliding Door Wardrobe

Add To Basket Inquire

Wood Veneer Finish With White Shelves Bookcase Furniture

Add To Basket Inquire

Modern Glass Swing door Closet

Add To Basket Inquire

Welcome to our comprehensive guide on how to properly measure kitchen cabinet doors. Accurate measurements are crucial when it comes to ordering new cabinet doors or making replacements. In this guide, we will provide you with detailed instructions and practical tips on how to measure your kitchen cabinet doors correctly. By following these steps, you can ensure that your new doors fit perfectly, saving you time and hassle in the long run.

Step 1: Gather Your Tools

Before you start measuring, make sure you have the following tools on hand:

• Tape measure
• Pencil
• Paper for taking notes
• Assistant (to hold the tape measure and assist with large doors)

Step 2: Measure Width and Height

The first step is to measure the width and height of each cabinet door. Follow these steps to ensure accuracy:

1. For width: Measure the width of the cabinet opening where the door will be installed. Take measurements at the top, bottom, and middle of the opening to account for any variations.
2. For height: Measure the height of the cabinet opening from top to bottom. Again, measure at multiple points to accommodate any irregularities in the opening.

Step 3: Check for Squareness

It's important to check if the cabinet openings are square before ordering new doors. Use a carpenter's square or a measuring tape to ensure that the angles are 90 degrees. If the openings are not square, make note of any discrepancies for adjustments during installation.

Step 4: Measure the Overlay

The overlay is the amount that the cabinet door overlaps the cabinet frame. There are three common types of overlays:

• Full overlay: The door completely covers the cabinet frame.
• Partial overlay: The door covers only part of the cabinet frame.
• Inset: The door is set into the cabinet frame.

Measure the overlay by determining how much the door covers the frame on each side. This measurement will help you choose the right door style for your cabinets.

Step 5: Consider Hinge Placement

Take note of the hinge placement on your existing cabinet doors. Measure the distance from the top and bottom of the door to the center of the hinge hole. This information will ensure that your new doors are compatible with the existing hinge placement.

Step 6: Confirm Thickness

Finally, measure the thickness of your current cabinet doors. Standard cabinet doors are typically 3/4 inches thick, but it's essential to double-check this measurement to ensure a proper fit.

Conclusion

By following these steps and taking accurate measurements, you can confidently order new kitchen cabinet doors that fit perfectly and enhance the overall look of your kitchen. Remember that precise measurements are the key to a successful cabinet door replacement project. If you encounter any difficulties or uncertainties during the process, don't hesitate to seek professional advice to ensure a smooth and seamless installation.

Thank you for reading our guide on how to measure kitchen cabinet doors. We hope this information has been helpful in assisting you with your cabinet renovation project. Good luck!