The bathroom vanity is the hardest-working cabinet in any building. Unlike kitchen or wardrobe cabinets, it lives in a permanently wet, humid, temperature-shifting environment, and it must integrate with plumbing, a basin, a countertop, and often a mirror. For developers, hotel operators, and procurement teams specifying vanity cabinets across many bathrooms, the specification determines not only appearance but years of trouble-free service — and the cost of call-backs when it fails.
This guide is written for professionals who specify vanities in volume — residential developments, hospitality, and trade projects — rather than a single homeowner. It covers vanity types, basins and countertops, materials with an emphasis on moisture resistance, dimensions, storage, finishes, hardware, lighting, manufacturing, quality control, cost, and the commercial decisions that determine whether a vanity program ships on time and performs. Where a choice affects cost, lead time, or quality, we state it plainly.
If you are sourcing custom vanities from China, the guidance here maps directly onto what a competent manufacturer should deliver. The principles parallel those for kitchen and wardrobe cabinets, but the bathroom environment demands its own material and construction rules, and this guide treats them in full.
The first specification decision is how the vanity sits in the room, because it changes the plumbing interface, the installation, and the look.
A wall-hung vanity is fixed to the wall with a concealed bracket, leaving a gap beneath. It reads as contemporary and light, makes the floor easier to clean, and suits smaller bathrooms by reducing visual mass. The requirement is a structural wall or installed backing panel capable of carrying the loaded unit plus basin and countertop — a point that must be confirmed at the building design stage, not during installation. Our white floating vanity with soft rounded edges and luxury wall-hung vanity show the format.
A floor-standing vanity rests on the floor, often with a plinth or legs. It is simpler to install (no structural wall loading), more forgiving of uneven floors, and reads as traditional or substantial. The trade-off is a heavier visual presence and a floor edge that needs sealing against moisture. Legged versions lift the carcass off the floor, improving ventilation and reducing rot risk.
Choose wall-hung where the wall can carry the load and the aesthetic is contemporary; choose floor-standing where installation simplicity and traditional looks matter. For large developments, confirm the wall structure per bathroom before specifying wall-hung across the board.
The number of basins determines width and layout:
Single sink: Typically 600–1200mm wide. Standard for secondary bathrooms, apartments, and hotel rooms.
Double sink: Typically 1200–1800mm wide, serving two users simultaneously. Standard for master ensuites and family bathrooms. Our classic white shaker double-sink vanity and wood-grain floating double-sink vanity show both styles.
Specify the basin count against the room's actual use. A double sink in a rarely used guest bathroom wastes width; a single sink in a busy family ensuite causes morning queues. The basin decision also drives the countertop and plumbing layout, so it should be fixed early.
The defining requirement for a vanity is resistance to a permanently humid environment. Material choice is therefore more consequential than for any other cabinet in the building.
PVC / vinyl: Fully moisture-impervious, the safest choice for wet bathrooms. Often the recommended substrate where water exposure is constant.
Moisture-resistant (MR) board: Treated particleboard or MDF with enhanced water resistance, a common and cost-effective choice when properly sealed.
Plywood: Naturally more dimensionally stable in humidity than particleboard, valued for premium vanities.
Solid wood: Attractive but moves with humidity; used mainly as a veneer or accent rather than a full wet-area body.
Lacquer (water-based): A sealed, smooth finish; specify water-based low-VOC lacquer for bathroom use. Our lacquer bathroom vanity is an example.
Melamine / laminate: Durable and economical, available in wood-grain and solid patterns. Our wood melamine vanity shows the look.
Wood veneer: Real timber surface over a stable, moisture-resistant core.
PVC film: Seamless and waterproof, ideal for humid environments.
The critical rule: every exposed edge and cut must be sealed, because water ingress at an unsealed edge is the most common cause of vanity failure. A competent manufacturer seals edges and recommends a moisture-resistant core for bathroom use. For a full material comparison, our material selection guide applies the same logic across product types.
The vanity and its top are specified together, because the basin type determines the countertop format and the cabinet's internal clearances.
Countertop (vessel) basin: Sits on top of the counter. Easy to install and stylish, but raises the overall height and reduces under-basin storage.
Undermount basin: Fitted beneath a solid countertop. Clean look, easy to wipe down, requires a stone or quartz top with a cutout.
Integrated basin: Basin and counter molded as one piece (solid surface or ceramic). Seamless and hygienic, the premium option.
Inset basin: Dropped into a counter cutout, flush with the surface.
Engineered stone / quartz: Durable, non-porous, and the most common premium top.
Ceramic / porcelain: Used for integrated basins and tops, hygienic and hard-wearing.
Solid surface: Seamless, repairable, and ideal for integrated basins.
Laminate / compact laminate: Cost-effective, water-resistant options available for value projects.
Specify the basin and countertop together with the cabinet, because the cutout, support, and splashback all depend on the combination. Undermount and integrated basins need a rigid top and precise cutouts; vessel basins need a flat, strong deck. Confirm whether the manufacturer supplies the top or whether it is sourced locally — integrated supply simplifies responsibility and matching. A practical selection method is to decide the basin type first, because it drives everything else. Vessel basins suit statement powder rooms where storage is secondary and height is not a constraint; undermount basins suit busy family bathrooms where a wipe-clean counter and maximum under-basin storage matter; integrated basins suit premium projects where hygiene and seam-free design justify the cost. Then match the top: quartz or stone undermount for durability and value, solid surface for integrated basins, and compact laminate for value projects where water resistance is verified. Note the weight: a stone top on a wall-hung vanity adds load the bracket must carry, so the top material should be confirmed before the fixing is specified. Document the basin-top-cabinet combination on one drawing so the three are sourced and built as a coordinated set rather than three separate purchases that may not align.
Correct dimensions prevent fit and ergonomics failures:
Height: Standard vanity tops sit around 850mm; wall-hung units can be set higher (900mm+) for comfort. Confirm against user height and local norms.
Depth: Typically 450–550mm. Shallow depths suit small bathrooms; deeper units need clearance from the door swing and toilet.
Width: Single 600–1200mm, double 1200–1800mm, in modular increments.
Toe space / plinth: Floor-standing units need a plinth or legs with a sealed base.
Basin clearance: Allow space in front of the basin (typically 600mm of clear floor) and clearance from the toilet and bath.
Measure the wall width, the positions of plumbing risers, and the door and toilet swing before drawing. Vanities interface with fixed services, so the drawing must show pipe locations so the carcass can be notched or routed accordingly.
Vanity interiors should be planned, not defaulted:
Drawers vs doors: Drawers (full-extension, soft-close) organize toiletries better than a single door with a shelf; double-sink vanities often pair a central door (around the pipe) with side drawers.
Pipe management: A U-shaped or notched drawer front clears the drain, preserving usable space. Specify this where a drawer sits over the plumbing.
Divided organizers: Trays for toiletries, hair tools, and medicines.
Electrical: A shaver socket or drawer with a power point for grooming devices, specified and wired during manufacture.
Ventilation: Back or base ventilation slots reduce trapped humidity inside the cabinet.
As with wardrobes, plan the interior around actual contents. A vanity with well-organized drawers performs far better than one with a single deep void where items get lost.
Vanity finishes follow the 2026 direction seen across cabinetry — matte, natural, and textured — with bathroom-specific accents:
Matte lacquer and matte melamine: The contemporary default, low-sheen and easy to maintain.
Wood grain and veneer: Warm and natural, bringing calm to the bathroom. Our classic wood-grain vanity and wood laminate vanity show the look.
Fluted and textured: Reeded fronts such as our wave-fluted wall-mounted vanity add depth.
Soft-rounded edges: Bull-nosed edges, seen in our white floating vanity with soft rounded edges, read as safe and crafted.
Two-tone: A wood-tone or color base with a contrasting top or handle accent.
Specify color by RAL or NCS code or a sealed sample. In bathrooms, where vanities sit under bright, even lighting, finish imperfections are more visible than elsewhere, so sample approval matters.
Vanity hardware faces humidity and cleaning chemicals, so two properties matter most: soft-close function and corrosion resistance.
Hinges: Concealed cup hinges with soft-close; specify corrosion-resistant plating for humid bathrooms.
Drawer slides: Under-mount full-extension soft-close, rated for the bathroom environment.
Handles: From minimal grips to matte black accents; specify finish durability against moisture.
Push-to-open: Handleless fronts use tip-on mechanisms, keeping the face clean and wipeable.
Brand logic follows other cabinets: European brands (Blum, Hettich) lead on feel and longevity at two to three times the cost of reliable Chinese domestic brands (DTC, Higold). For bathrooms, prioritize corrosion resistance in the specified brand's bathroom-rated lines. For full guidance, see our cabinet hardware guide. Always name brand and model rather than "soft-close." One further hardware point specific to vanities: the drawer over the plumbing. Where a drawer sits above the drain, specify a U-shaped or notched front so the drawer clears the pipe while still holding organizers — a standard detail, but one that must be called out, because a straight drawer simply will not fit. Also consider soft-close on the door that hides the trap, so the access panel closes gently after maintenance. These small hardware decisions are invisible in a brochure but decisive in daily use, and they are exactly the kind of detail a specification should name rather than leave to the factory default.
The vanity area is a task-lighting zone, and integrated solutions outperform retrofits:
Backlit and front-lit mirrors: Even, shadow-free face lighting; specify color temperature (typically 3000–4000K) and a diffused source.
Mirror cabinets: A mirrored front with internal storage and often integrated lighting, combining reflection and organization.
Under-vanity LED: A subtle glow beneath wall-hung units, popular in contemporary schemes.
In-drawer lighting: Illuminates contents when the drawer opens.
Specify lighting during design so channels, drivers, and wiring are built in. Define voltage (12V or 24V), control (sensor or switch), and IP rating where proximity to water requires it. A coordinated mirror-and-vanity package, supplied together, avoids on-site electrical conflicts and mismatched finishes.
The vanity is the only cabinet in the building that must accommodate live services, so the plumbing interface must be specified, not assumed.
Pipe cutouts: The drawing must show the drain and supply positions so the carcass is notched or a U-drawer is specified. A vanity drawn without pipe locations arrives unable to fit the room's services.
Wall-hung fixing: Confirm a structural wall or backing panel rated for the loaded unit. The manufacturer should supply the fixing bracket and load rating; the builder installs it to a verified wall.
Splashback and sealing: A backsplash (matching top or tile) and a sealed wall-to-vanity joint prevent water reaching the wall and the cabinet back.
Trap access: Ensure the U-drawer or door provides access to the trap for maintenance without dismantling the cabinet.
These details belong in the shop drawing and the installation note. A vanity that cannot clear the existing pipework is a specification failure, not a manufacturing fault. For renovation or fit-out projects where existing plumbing cannot move, measure the drain and supply positions precisely and transfer them to the drawing with tolerances, then confirm the manufacturer can route the carcass accordingly — sometimes a shallow notch in a back panel is enough, other times the drawer configuration must shift. For new-build developments, the better approach is to set the plumbing positions from the vanity drawing, so the services are installed to suit the cabinet rather than the reverse. Either way, the drawing is the contract: if the pipe positions are on it and the cabinet arrives prepared, installation is straightforward; if they are missing, the fault is in the specification, and the cost of fixing it on site falls on the project.
The 2026 vanity palette favors calm, natural, and tactile surfaces that make bathrooms feel like spa spaces:
Warm white and off-white: The dominant neutral, timeless and light-enhancing.
Soft timber: Wood-grain fronts bring warmth; our wood-color wall-hung vanity shows the direction.
Matte black accents: Handles, legs, or frames in matte black for contrast.
Fluted and curved: Textured and soft-rounded fronts, seen in our curved floating vanity.
Integrated and vessel basins: As design statements.
Our broader 2026 trends article covers the shared direction. For vanities, restraint pays: a calm, moisture-appropriate finish specified today stays current longer than a bold color, and it ages better in bright bathroom light.
Bathrooms vary by climate and use, and the material must match:
High-humidity and coastal markets: Specify PVC or fully sealed MR board, corrosion-resistant hardware, and waterproof adhesives. Essential for Gulf, Caribbean, and coastal Australian projects.
Family bathrooms: Durable melamine or PVC fronts resist scuffs and cleaning chemicals better than high-gloss lacquer.
Luxury residential: Matte lacquer and wood veneer deliver the premium look, provided edges are sealed and the core is moisture-resistant.
Commercial and hotel: Robust, easily cleaned finishes with hardened hardware for high cycle counts.
Matching material to environment is non-negotiable for vanities. A vanity specified for the wrong humidity fails early regardless of build quality. A useful rule of thumb for specifiers: treat the bathroom as a gradient of wetness rather than a single zone. The area immediately around the basin and the floor edge is the wettest and demands the most resistant material and the most diligent sealing; upper sections and spaces away from direct splash can use premium but less impervious finishes such as veneer or lacquer. This zoned approach lets you place a beautiful wood-veneer upper section above a PVC or sealed-MR base, achieving the desired look without exposing the whole unit to failure. Communicate the zoning in the specification so the manufacturer builds the right material in the right place, and so the finished vanity looks considered rather than uniformly compromised.
As with all cabinetry, treat sustainability as a documented specification:
Formaldehyde emission class: Specify E1 (or E0) board and request the test certificate.
FSC / PEFC: For veneer and timber components, request chain-of-custody documentation.
Low-VOC finishes: Water-based lacquers and low-emission adhesives, named in the spec.
Market compliance: CARB for the US and relevant regional marks.
A manufacturer serving international markets should provide these on request. Requesting them during evaluation is a fast filter for serious exporters.
Most export vanities are made to order. The sequence parallels other cabinets: inquiry and quotation, design and shop drawings (including plumbing layout), sample approval, deposit and production slot, manufacturing, quality control, packing, and shipping. Total lead time from order confirmation to delivery typically runs 8–12 weeks including ocean freight, with lacquer finishes and peak-season shipments at the longer end.
Vanities add a countertop and basin coordination step, which can extend lead time if the top is sourced separately. Our production and shipping timeline guide details each stage in weeks. Plan 10–14 weeks before your required delivery date to include a buffer, and confirm whether the top and basin are included in the manufacturer's scope or supplied locally.
For vanities, the checkpoints that matter most are moisture-related and interface-related:
Raw material: Board grade, emission class, and moisture-resistance verification on arrival.
Edge sealing: Every exposed edge and cut sealed against water ingress — the most important vanity check.
Finish and hardware: Color consistency, corrosion-resistant hardware function, and soft-close.
Basin and top fit: Cutout accuracy for undermount or inset basins, and countertop flatness.
Pre-shipment: A final check including hardware operation and a review of the plumbing cutout against the drawing.
For larger orders, third-party inspection provides an objective check before the container seals. Agree an acceptable defect rate (industry norm 2–3%) and the remedy before production. Our quality control guide details the full system.
When comparing vanity quotations, understand what moves the number:
Material: PVC and MR board cost less than plywood and lacquer; solid surface and quartz tops cost more than laminate.
Basin and top: Integrated basins and stone tops add cost; a separate local top may be cheaper or more expensive depending on market.
Configuration: Double sink, drawers over doors, and U-drawers around pipes add cost.
Finish: Matte lacquer and textured surfaces cost more than plain melamine.
Hardware: European soft-close systems cost two to three times domestic.
Lighting and mirror: Integrated lit mirrors and LED add cost.
Incoterms: FOB, CIF, and DDP change what you pay and what the supplier handles.
A low quotation usually reflects a difference in one of these variables. Compare like-for-like by writing a complete specification first, then requesting quotes against it.
Evaluating a vanity manufacturer goes beyond price:
Moisture expertise: Do they specify sealed edges and a moisture-resistant core by default for bathrooms, or treat vanities like any other cabinet?
Top and basin scope: Can they supply the countertop and basin, or only the cabinet? Integrated supply simplifies responsibility.
Documentation: Do they return drawings showing plumbing cutouts and fixing details without being chased?
Hardware: Do they specify corrosion-resistant, named hardware?
Communication and references: A single accountable contact and comparable export projects to your markets.
A manufacturer who treats bathroom moisture as a first-class requirement — not an afterthought — is the one who delivers vanities that survive. One who does not is a risk regardless of price.
The errors that cause most vanity problems:
Non-moisture-resistant material: Specifying standard board for a wet bathroom. Always specify MR or PVC for wet areas.
Unsealed edges: Accepting a vanity with exposed, unsealed cuts. This is the leading cause of swelling and failure.
Missing plumbing cutouts: Drawing the vanity without showing pipe positions, so it cannot fit the room's services.
Wall-hung without load verification: Specifying wall-hung across a development without confirming structural walls or backing panels.
Vague finishes: "Soft-close" and "white" without brand and code invite mismatch.
No written quality agreement: Without an agreed defect rate and remedy, disputes are negotiated from weakness.
Vanity expectations differ by region:
Australian and New Zealand buyers expect AS/NZS-compliant, moisture-resistant construction and wall-hung contemporary styles are popular. Stone or quartz tops are expected in mid- and upper-market bathrooms. Shipping to Australian and NZ ports is a well-established lane.
The UK favors compact, efficient vanities for smaller bathrooms, often with integrated storage and muted, sophisticated finishes. Moisture resistance is expected given the climate, and buyers respond to matte and wood-tone fronts.
The US market uses both single and double vanities, with double-sink master ensuites common. Confirm dimensions in imperial conventions and expect precise, code-compliant deliverables, including plumbing coordination.
Gulf projects demand high heat and humidity resistance, making PVC and sealed MR board attractive, and often specify larger, more luxurious master bathrooms. Gold and brass accents remain popular, and volume programs with consistent finishing across many units are common.
Caribbean projects face high humidity and salt air, so moisture resistance and corrosion-resistant hardware are priorities. Shipping involves transshipment, so robust export packing and realistic lead-time buffers are essential.
Tell the manufacturer the destination and buyer profile so material, hardware, and packing are adjusted accordingly.
The manufacturer controls dimensional accuracy, edge sealing, finish quality, hardware function, basin and top fit, and packing. The installer controls wall plumbness (via scribe allowances), wall-hung bracket fixing to a verified wall, leveling, and the sealed joint between vanity and wall.
The most common failure is a wall-hung vanity installed to a wall that cannot carry the load, or a vanity that cannot clear the existing pipework because the drawing omitted it. Both are specification or installation interface failures, not manufacturing defects. Specify scribe allowances, supply the fixing bracket with a load rating, and show pipe positions on the drawing so the carcass is prepared for the room's actual services.
Vanity longevity depends on build quality and care:
Sealing: Keep the wall-to-vanity and countertop joints sealed; reseal if they crack. Water behind the vanity is the main cause of damage.
Ventilation: Extractor use and internal vent slots reduce trapped humidity.
Cleaning: Matte and lacquer fronts clean best with mild, non-abrasive products; avoid bleach on edges.
Hardware: Soft-close mechanisms are maintenance-free for their rated life; specify the cycle rating.
Basin care: Avoid standing water in integrated basins where the material is susceptible.
These points belong in the specification and handover documentation. A vanity that looks good on handover and fails in two years reflects a specification that ignored the bathroom environment.
For developers delivering multiple bathrooms, after-sales logistics matter:
Warranty terms: What is covered, for how long, and what voids it (e.g., unsealed edges, moisture exposure from failed sealing).
Spare parts: Will the manufacturer hold hardware, basins, and a small stock of doors for your project so a future repair uses matching parts?
Replacement lead time: How fast can a color-matched replacement ship? Depends on retained finish batches.
Documentation: Request care and warranty documents in the buyer's language.
A supplier who can articulate a spares and warranty process is thinking beyond the first shipment — a strong signal for volume buyers.
To make the guidance concrete, here are specification combinations for common vanity types:
Premium contemporary: Wall-hung, 18mm MR MDF matte lacquer doors (RAL code), sealed edges, Blum soft-close corrosion-resistant hardware, integrated or undermount basin with quartz top, lit mirror. Best for high-end residential and hotels.
Value contemporary: Floor-standing or wall-hung, 18mm wood-grain melamine doors, MR board carcass, DTC soft-close, undermount basin with compact laminate top. Strong for volume residential.
Wet-climate: PVC or fully sealed MR board throughout, corrosion-resistant hardware, matte finish, integrated basin. For Gulf, Caribbean, and coastal projects.
Traditional: Floor-standing, painted MDF or wood-grain shaker doors, classic handles, DTC or Blum hardware. Suits UK and US traditional markets.
Compact hotel: Wall-hung single, durable melamine, simple organized drawers, robust hardware for high cycle counts.
Each combination is buildable in a single manufacturing program so colors and quality stay consistent across the bathrooms. For coordinated cabinetry, the same material language can extend to kitchen cabinets and wardrobe cabinets.
The quality of your quotation depends on the quality of your inquiry. A complete vanity brief contains:
Bathroom plans: Dimensioned drawings showing wall lengths, ceiling height, door and toilet positions, and existing plumbing riser locations.
Vanity format: Wall-hung or floor-standing, per bathroom.
Basin count: Single or double, with the basin type (countertop, undermount, integrated).
Materials and finishes: Named by type and code, stating carcass and door materials with moisture-resistance grade.
Top and basin scope: Whether the manufacturer supplies the countertop and basin or they are local.
Internal layout: Drawers, doors, U-drawers around pipes, organizers.
Lighting and mirror: Lit mirror, under-vanity LED, electrical requirements.
Quantities and scope: Number of vanities per type across the project.
Target budget and market: A realistic range and destination market.
Destination port and Incoterm: FOB, CIF, or DDP.
Required certifications: E0/E1, FSC, CARB, or market-specific marks.
Timeline: Required delivery date and seasonal constraints.
Send this package to two or three shortlisted manufacturers and compare the resulting drawings and quotations against the same specification. The comparison reveals not just price but how thoroughly each supplier understood your requirements — especially the plumbing interface, which separates experienced vanity exporters from general cabinet makers.
A successful vanity program is the product of a clear specification, a capable manufacturer, and a disciplined process — and above all, respect for the bathroom environment. The decisions that matter most are made on paper, before production: the format and its structural requirement, the moisture-resistant material and sealed edges, the basin and countertop specified together, the plumbing cutouts shown on the drawing, the finish specified by code, the corrosion-resistant hardware named by brand and model, and the quality standard agreed in writing.
The 2026 vanity direction — calm matte and wood-tone finishes, fluted and curved fronts, soft-rounded edges, integrated lighting, and restrained two-tone composition — is achievable within a single custom manufacturing program, provided the specification is precise and the batch-matching plan is confirmed. The difference between a vanity that elevates a bathroom and one that swells and fails almost always lies in the moisture specification and the sample approval, not the concept.
For developers and procurement teams specifying at volume, the return on a thorough specification compounds: faster, more accurate quotations; fewer on-site surprises; lower defect and rework rates; and a finished result that supports the sales or rental price. Treat the specification as the project's most important document.
If you are planning a vanity program and want to move from this guide to a buildable specification for your market, our design service can develop drawings, finishes, and material schedules with you, and you can request a quotation for your cabinetry. For coordinated storage across the home, explore our vanity cabinets, kitchen cabinets, and wardrobe cabinets.
What is the difference between a wall-hung and floor-standing vanity?
A wall-hung vanity is fixed to the wall with a concealed bracket, leaving a gap beneath; it reads contemporary and eases floor cleaning but requires a wall that can carry the load. A floor-standing vanity rests on the floor, is simpler to install, and reads more traditional.
Which vanity material is best for a bathroom?
Moisture resistance is the priority. PVC or moisture-resistant (MR) board with fully sealed edges performs best in wet bathrooms; plywood and sealed lacquer or veneer suit premium dry-ish environments. Standard untreated board should be avoided in wet areas.
What size should a vanity be?
Standard tops sit around 850mm high (wall-hung can be higher), depth is typically 450–550mm, and width runs 600–1200mm for single and 1200–1800mm for double basins. Confirm against user height, room size, and plumbing positions.
Should the basin and countertop be supplied with the vanity?
Ideally yes. Integrated supply simplifies responsibility and finish matching. If the top is local, confirm the cutout and support details with the vanity manufacturer so the two fit precisely.
Are Chinese-manufactured vanities good quality?
Quality varies by manufacturer. Competent exporters specify moisture-resistant materials, sealed edges, and corrosion-resistant hardware, and document the process. The key is specifying precisely and verifying the process, not assuming a country-level quality level.
How long does it take to get custom vanities from China?
From order confirmation to delivery, typically 8–12 weeks including ocean freight, longer where a separate stone top is coordinated or during peak season. Plan 10–14 weeks before your required delivery date.
What is an acceptable defect rate for vanity orders?
An industry norm of 2–3 percent is generally acceptable, with defective units replaced or reworked at the manufacturer's cost. Agree this in writing before production.
Why do vanities fail, and how do I prevent it?
Most failures stem from water ingress at unsealed edges or non-moisture-resistant material in a wet environment. Prevent them by specifying MR or PVC board, requiring sealed edges, and keeping wall and countertop joints sealed after installation.
We employ cookies to analyze website traffic and enhance your browsing experience. Data securely aggregated, privacy protected. See Privacy Policy for details.
