Gabinetes BFP Gabinetes BFP
Estás aquí:
Definición

Pre ensamblado cabinets arrive with the carcass already built and glued square in the factory. Doors and drawers may be fitted or shipped separately to protect them in transit. The installer unpacks, positions and fixes — there is no box to build on site.

Two levels of assembly

Carcass assembled, fronts separate. The box is glued and squared, doors and drawer fronts travel in a separate carton. This protects the finish, keeps the packed height manageable and still removes all carcass labour from site. It is the most common specification for project work.

Fully assembled. Doors hung, drawers in, ready to place. Faster still, but the unit is now a fragile object with a 2.1 m lever arm, and damage in transit becomes a real cost. Used where the site is close to the factory or where the programme leaves no alternative.

Assembly states compared
EstadoTrabajos en el sitioVolumen de envíoRiesgo de daño
Flat-packed (RTA)Montaje completoMás bajoDaños en el borde
Carcass assembled, fronts separatePosicionar y fijar30–50% above RTADaños en las esquinas
Completamente ensambladoPlace only50–60% above RTAFace and corner damage

Why the freight premium is often worth it

A glued carcass is square because it was clamped square, not because someone checked it. On a project with 200 units, that consistency is the difference between a clean handover and a snagging list of doors that will not close.

It also moves labour off a site where labour may be scarce, expensive or unskilled. On remote or island projects, the assembly team that RTA assumes often does not exist — and the cost of flying one in exceeds the freight premium several times over.

What to specify, and what to inspect

Specify the assembly state explicitly: carcass glued and squared, fronts separate, fittings bagged per unit. Otherwise "pre-assembled" can mean anything from a box with the back stapled on to a finished cabinet.

Inspect the diagonal. A carcass that is 3 mm out across a 600 mm diagonal will show as a door gap at one corner, and it cannot be corrected after the glue has cured. Check three units per pallet, not one per shipment.

Preguntas frecuentes

What does pre-assembled actually include?

Usually the carcass built and glued square, with doors and drawer fronts packed separately. Confirm whether hinges, runners and handles are fitted or bagged.

How much more does it cost to ship?

Typically 30–60% more volume than flat-packed, which translates to a proportional freight cost. The trade is against site labour and rework.

Is pre-assembled stronger than RTA?

The carcass is, because it is glued and clamped square. The board and hardware may be identical.

¿Se pueden ajustar los armarios preensamblados en el lugar de instalación?

Position and fix, yes. The box itself cannot be re-squared once the glue has cured, so inspection has to happen before packing.

BFP
Equipo del proyecto BFP
Fabricación y exportación de muebles de cocina · desde 2016

Esta guía se basa en archivos de proyectos reales: revisiones de especificaciones, informes de inspección previa al envío y documentos de despacho de aduanas de apartamentos, casas adosadas y villas. Cuando una cifra varía según el proyecto, indicamos el rango en lugar de un número único. Las normas y el tratamiento arancelario deben confirmarse con la versión vigente y con su agente de aduanas.

  Envíe los planos de planta, el número de unidades, los dibujos y el precio por unidad en un plazo de 24 horas.
Casos de proyectos relacionados
Todos los proyectos →


×

Contáctenos

* Nombre completo
Email de negocios *
WhatsApp / Teléfono (Respuesta rápida)
Tipo de proyecto (opcional)
Unidades/Cantidad estimadas (opcional)
Detalles del proyecto / Mensaje *

Este sitio web utiliza cookies.

Utilizamos cookies para analizar el tráfico del sitio web y mejorar tu experiencia de navegación. Datos agregados de forma segura y privacidad protegida. Consulta la Política de Privacidad para más detalles.

Estoy de acuerdo